BGP路由反射-network实验笔记

文章作者 100test 发表时间 2007:06:26 11:52:12
来源 100Test.Com百考试题网

详细介绍RFC1966文档。

　　实验拓扑：

　　R1——R7——R3

　　分别用串口连接

　　配置如下：

　　R7：

hostname r7 interface Loopback0 ip address 116.83.25.1 255.255.255.0 interface Loopback1 ip address 116.83.26.1 255.255.255.0 ! interface Ethernet0 no ip address ! interface Serial0 ip address 192.168.54.5 255.255.255.252 encapsulation ppp no fair-queue ! interface Serial1 ip address 192.168.54.1 255.255.255.252 encapsulation ppp ! router bgp 15210 network 192.168.54.0 neighbor 192.168.54.2 remote-as 15210 neighbor 192.168.54.2 route-reflector-client 配置充当反射客户端的每个邻居. neighbor 192.168.54.6 remote-as 15210 建立BGP对等体关系 neighbor 192.168.54.6 route-reflector-client no auto-summary !

　　R2：

hostname r2 interface Loopback0 ip address 10.1.1.1 255.255.255.0 ! Router bgp 15210 bgp log-neighbor-changes network 10.1.1.0 mask 255.255.255.0 network 192.168.54.0 mask 255.255.255.0 neighbor 192.168.54.1 remote-as 15210 no auto-summary

　　R3：

router bgp 15210 no synchronization bgp log-neighbor-changes network 192.168.54.0 mask 255.255.255.0 neighbor 192.168.54.5 remote-as 15210 no auto-summary

src="/cisco/js/wxgg_cisco.js">