RIP实现等开销负载均衡的配置

文章作者 100test 发表时间 2008:03:15 10:01:56
来源 100Test.Com百考试题网

　　实验说明：通过使用debug命令基于每个分组和每个目的地来考察等开销负载均衡。

　　实验配置：

r1#sh run interface Ethernet0 ip address 10.0.0.1 255.255.255.0 ! interface Serial0 ip address 192.168.1.2 255.255.255.0 ! router rip network 10.0.0.0 network 192.168.1.0 !

r2#sh run interface Loopback0 ip address 192.168.3.2 255.255.255.0 secondary ip address 192.168.3.1 255.255.255.0 ! interface Serial0 ip address 192.168.1.1 255.255.255.0 clockrate 64000 ! interface Serial1 ip address 192.168.2.1 255.255.255.0 clockrate 64000 ! router rip network 192.168.1.0 network 192.168.2.0 network 192.168.3.0 !

r3#sh run interface Ethernet0 ip address 10.0.0.2 255.255.255.0 ! interface Serial1 ip address 192.168.2.2 255.255.255.0 ! router rip network 10.0.0.0 network 192.168.2.0 !

r2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set R 10.0.0.0/8 [120/1] via 192.168.1.2, 00:00:23, Serial0 [120/1] via 192.168.2.2, 00:00:19, Serial1 C 192.168.1.0/24 is directly connected, Serial0 C 192.168.2.0/24 is directly connected, Serial1 C 192.168.3.0/24 is directly connected, Loopback0